Certifications

Certification documents are available upon request. To learn more, visit our Request More Information page.

U-Stamp
UM-Stamp
S-Stamp_Gray

ASME U, UM & S Stamps
Super Radiator Coils currently holds the ASME U, UM and S stamps. Coils requiring such certifications are designed, constructed and tested to meet the requirements of the applicable section of the ASME Boiler and Pressure Vessel Code. U Stamp - Unfired Pressure Vessels under Section VIII, Division 1 of the code. UM Stamp - Unfired Pressure Vessels under Section VIII, Division 1 of the code. S Stamp - Power Boilers under Section I of the code.

N-Stamp_Gray
NPT-Stamp_Gray
NS-Stamp_Gray

ASME N & NPT Stamps & NS 
Super Radiator Coils currently holds the ASME N and NPT stamps and NS certification authorization for coils, components and supports that are used in nuclear power plants for safety critical applications. Nuclear Vessels, Appurtenances and Supports for ASME Section III, Class 2 and 3.

R-Stamp (002)

NBBI “R” Stamp: The National Board of Boiler and Pressure Vessel Inspectors
The scope of Authorization is limited as follows: Metallic Repairs & Alterations to Pressure Containing items in accordance with the provisions of the National Board (NBIC).

UL-gray

UL 207 - Underwriter’s Laboratories
Evaporator and Condenser coils are listed with Underwriters Laboratories and built in accordance with the requirements of UL 207 and ANSI / ASHRAE Std. 15, the Safety Code for Mechanical Refrigeration.

crn-logo

Canadian Registration Number
Coils with working pressures over 15psi that are installed in Canada must have a Canadian Registration Number (CRN) issued by the province where the coils will be installed. Super Radiator Coils obtains CRN numbers in accordance with the Canadian “Boiler” Pressure Vessel and Pressure Piping Code (B51).

CSA-gray

Canadian Standards Association
This is an additional option in where coils are certified with CSA and built in compliance with STD C22.2 and all provisions governing that certification.

CE-Logo_Gray

European Mark
Coils installed in Europe are required to be built in accordance with the Pressure Equipment Directive (PED). The PED dictates when a CE mark can and cannot be applied to a coil. Super Radiator Coils can build coils in accordance with the PED for Categories SEP, I, II and III.

Navsea-Logo---Gray

NAVSEA Welding.                                            Super Radiator Coils is approved for NAVSEA Welding to MIL-STD-S9074-AQ-GIB-010/248 & MIL-STD S9074-AR-GIB-010/278

ahri-logo

AHRI Standard 410 - Air Conditioning, Heating and Refrigeration Institute
The performance ratings for certain water and steam coils are certified to AHRI. These ratings are established by testing to ASHRAE Std. 33 and are certified to AHRI in accordance with AHRI Std. 410

ETL_Dark Gray

Intertek’s ETL Certification.                            Certain Super Radiator Coils condensers and evaporators are listed with ETL in accordance with the Standard for Safety Heating and Cooling Equipment (ANSI/UL 1995 3rd Edition, CAN/CSA C22.2 No 236-05) for forced air circulation.

 

ISO Certifications

All Super Radiator Coils facilities are ISO 9001:2015 certified

Super Radiator Coils
Richmond, VA facility is ISO 9001:2015 certified

Richmond, VA #QSR-947

Super Radiator Coils
Phoenix, AZ facility is ISO 9001:2015 certified

Phoenix, AZ #0812-232

Super Radiator Coils
Chaska, MN facility is ISO 9001:2015 certified

Chaska, MN #10018327 QM15

Find the answers you need

Simply answer a few questions and we’ll help you find the right solution.

Request a Quote