Certification documents are available upon request.

U-UM-S-Stamp-Certs-2.png#asset:2791- ASME U, UM & S Stamps

Super Radiator Coils currently holds the ASME U, UM and S stamps. Coils requiring such certifications are designed, constructed and tested to meet the requirements of the applicable section of the ASME Boiler and Pressure Vessel Code. U Stamp - Unfired Pressure Vessels under Section VIII, Division 1 of the code. UM Stamp - Unfired Pressure Vessels under Section VIII, Division 1 of the code. S Stamp - Power Boilers under Section I of the code.

N-NPT-NS-Stamps-2.png#asset:2792- ASME N & NPT Stamps & NS Certification

Super Radiator Coils currently holds the ASME N and NPT stamps and NS certification authorization for coils, components and supports that are used in nuclear power plants for safety critical applications. Nuclear Vessels, Appurtenances and Supports for ASME Section III, Class 2 and 3.

Certification-R-Stamp-2.png#asset:2772 - NBBI "R" Stamp: The National Board of Boiler and Pressure Vessel Inspectors

The scope of Authorization is limited as follows: Metallic Repairs & Alterations to Pressure Containing items in accordance with the provisions of the National Board (NBIC).

Certification-UL-3.png#asset:2771- UL 207 - Underwriter's Laboratories
Evaporator and Condenser coils are listed with Underwriters Laboratories and built in accordance with the requirements of UL 207 and ANSI / ASHRAE Std. 15, the Safety Code for Mechanical Refrigeration.

Certification-CRN-2.png#asset:2769 - Canadian Registration Number
Coils with working pressures over 15psi that are installed in Canada must have a Canadian Registration Number (CRN) issued by the province where the coils will be installed. Super Radiator Coils obtains CRN numbers in accordance with the Canadian "Boiler" Pressure Vessel and Pressure Piping Code (B51).

Certification-CSA-2.png#asset:2770- Canadian Standards Association
This is an additional option in where coils are certified with CSA and built in compliance with STD C22.2 and all provisions governing that certification.

Certification-CE-Stamp-2.png#asset:2768- European Mark
Coils installed in Europe are required to be built in accordance with the Pressure Equipment Directive (PED). The PED dictates when a CE mark can and cannot be applied to a coil. Super Radiator Coils can build coils in accordance with the PED for Categories I, II and III.


Super Radiator Coils is approved for NAVSEA Welding to MIL-STD-S9074-AQ-GIB-010/248 & MIL-STD S9074-AR-GIB-010/278

Certification-AHRI-2.png#asset:2767- AHRI Standard 410 - Air Conditioning, Heating and Refrigeration Institute

The performance ratings for certain water and steam coils are certified to AHRI. These ratings are established by testing to ASHRAE Std. 33 and are certified to AHRI in accordance with AHRI Std. 410

ISO Certifications - All Super Radiator Coils facilities are ISO 9001:2015 certified

Super Radiator Coils - Richmond, VA facility is ISO 9001:2015 certified

Richmond, VA #QSR-947

Super Radiator Coils - Phoenix, AZ facility is ISO 9001:2015 certified

Phoenix, AZ #0812-232

Super Radiator Coils - Chaska, MN facility is ISO 9001:2015 certified

Chaska, MN #15558